Features:

• Expanded Polystyrene (EPS) bonded to plasterboard.
• Designed as a simple effective way to improve the thermal efficiency in both walls and roof applications.
• Quick and easy to install.
• Can be used for both newbuild and refurb.
• Cost effective return.
• Fully applicable with Part L of the building regulations.

Technical data:

• Overall thickness - 50mm
• Foam thickness - 40.5mm
• Plasterboard thickness - 9.5mm
• m² per board - 2.88
• Thermal resistance R-value - 1.111
• U-value fixed batons - 0.573W/m²K
• U-value dot & dab - 0.594W/m²K

Storage information:

• Plasterboard panel products should be stored inside, lying flat, and be supported evenly on a firm, dry, level, and structurally sound floor.
• Exposure to rain and other high moisture levels may result in water stains, discoloration, mould, paper delamination, and sag.
• Failure to remove this plastic covering can result in damage to panels due to moisture, condensation, wet product, and/or mould.