IKO Hyload Tanking Membrane 2000SA 1x15mtr

Features:

• Suitable for a wide range of general waterproofing applications.
• Intended for installation where the severity of the ground and other conditions impose high demands upon the integrity and overall performance of the waterproofing system e.g. in basements and sub-structures.
• Cold applied, flexible waterproofing membrane combining a special high performance cross laminated, HDPE carrier film with a self adhesive SBS polymer modified bitumen compound.
• When applied horizontally to floors and vertically to walls Hyload Tanking Membrane 2000SA will provide a continuous barrier to moisture.
• The cross-laminated film provides dimensional stability, high tear strength, puncture and impact resistance.
• Due to the flexibility it will accommodate minor settlement and shrinkage movements.
• Suitable for a range of substrates, cast concrete, brick and blockwork constructions.
• Suitable for tanking both internally and externally.
• Easy to install, progressively removing the silicone treated release film.
• BBA Approved (Cert No 98/3479).
• Specification compliant with BS 8102:2009.

Technical data:

• Composition - HDPE/Bitumen
• Colour - Black
• Thickness - 1.5mm nominal
• Roll length - 15mtr
• Roll width - 1mtr
• Tensile strength (Long) - 215N / 50mm
• Tensile strength (Trans) - 220N / 50mm
• Elongation at break (Long) - 324%
• Elongation at break (Trans) - 238.0%
• Tear resistance (Long) - 125N
• Tear resistance (Trans) - 65N
• Peel resistance - 35N / 50mm
• Shear resistance of joints (Long) - 275N / 50mm
• Shear resistance of joints (Trans) - 270N / 50mm
• Water tightness - Passed at 60kpa
• Resistance to impact - Method A: 1700mm, Method B: 1000mm
• Water absorption - No penetration
• Adhesion to steel > 250N
• Adhesion to primed concrete > 250N
• Material - HDPE / Bitumen
• Brand - IKO

Please note - Hyload Tanking Membrane 2000SA was previously known as Plasprufe 2000SA.