Stihl Petrol Cut Off Saw

Features:

• Reduced-emission engine technology - 2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
• Pre-separation air filtration system - STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
• Anti-vibration system - Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine’s engine are dampened which significantly reduces vibrations at the handles.
• Water supply - Water is supplied to the cutting wheel through the standard water connection with sprinkler system to suppress the dust produced during cutting. It is supplied to the device in such a way so as not to interfere with your work.
• Manual fuel pump (Purger) - A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
• Ergonomic grip position - The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.
• Semi automatic drive belt tensioning - Light, consistent re-tensioning increases the service life of the belts and shaft bearings.
• Long-life filter system with cyclone pre-separation makes on site maintenance unnecessary.
• Compact design and optimised balance for excellent cutting and guide characteristics.
• High performance engine with stratified charge system.
• ElastoStart, primer pump and decompression valve.
• Can be hand held or used with the FW 20 cart.
• Bayonet filler cap for tool free opening.
• Extremely low vibration levels (3.9m/s²).
• Supplied with abrasive cutting wheel.
• For use with 300mm cutting wheel.

Technical data:

• Performance - 3.2kW
• CO2 g/kWh - 747
• Capacity - 66.7cm³
• Vibration value, right - 3.9m/s²
• Weight - 9.60kg
• Sound pressure level - 98dBA
• Sound power level - 109dBA
• Vibration value, left - 3.9m/s²
• Tank volume l - 0.71
• Power output - 3.2/4.4kW/bhp
• Weight - 9.4kg
• Sound pressure level - 98.0dBA
• Sound power level - 109.0dBA
• Vibration levels left/right - 3.9/3.9m/s²
• Cutting wheel - 300mm
• EPA Certified fuel consumption - 2.048ltr/hr