trend® Lock Jig

Features:

• This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks.
• For most common sash mortises & dead locks, with up to 3" deep mortises & a 7/8" or 1" face-plate.
• Deeper mortises can be achieved with a suitable size of auger bit.
• Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
• Steel plates & body.
• An auger bit and drill is required to complete deep mortises.
• The jig requires a ½" plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.
• A ¼" plunge router can be used for the face plate but will not achieve full depth of mortise.

Technical data:

• Door thickness min. - 34mm
• Door thickness max. - 58mm
• Template outer size 234.3x59.8x1.5mm
• Brand - trend®

Templates to use for locks having the following face-plate dimensions:

Metric (Imperial approx.) Diameter x Overall length.

• 22.2x156mm(7/8x6.1/8") - 1
• 22.5x152.5mm (7/8x6") - 2
• 25.4x121mm (1x4.3/4") - 3
• 25.4x127.5mm (1x5") - 4
• 25.4x133.5mm (1x5¼") - 5
• 25.4x145mm (1x5¾") - 6
• 25.4x153mm (1x6") - 7
• 25.4x156.5mm (1x6") - 8
• 25.4x165.5mm (1x6½") - 9
• 25.4x177mm (1x7") - 10
• 25x57.5mm (1x2¼") - 11 Upper
• 26x56.5mm (1x2¼") - 11 Lower
• 25.6x162mm (1x6.3/8") - 12

Mortise Lock Template Dimensions:

Imperial (Metric) Diameter x Overall length.

• 16x72mm (5/8x2.7/8") - A
• 16x107mm (5/8x4¼") - B
• 19x78mm (¾x3.1/8") - C
• 19x109mm (¾x4¼") - D

Please note - These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel - Actual length of mortise is 7mm longer

Set consists of:

• Guide bush collar
• 12 x Face plate templates
• 4 x Mortise templates
• 6 x Spacer fingers