Wago Connector Push Wire 4 Conductor 2.5mm 24Amp

Wago 4 way push cable connectors meet BS7671 regulations (773 series)

Features:

• The Wago 3 way push wire connector 773 series orange simply pushing the stripped conductor into the connector makes the connection.
• The transparent housing provides a visible indication that the conductor is secure.
• There is a test point in the base of the housing.
• To remove the connector simply pull on the conductor whilst twisting the connector block left and right.
• The connector can then be reused.
• Wago connectors meet the most stringent UK and international standards including the electrical requirements of BS7671 17th edition.
• Installers can be totally confident that using Wago connectors enables them to follow ’best practice’ procedures and fully comply with the most up to date safety criteria.
• It ensures gastight and maintenance free connection.
• Pushwire connectors are used exclusively for solid and 7 stranded conductors ranging from 0.75-2.5mm².
• The design ensures that every conductor is clamped in a separate clamping unit along the current bar.
• The rating is 400V, 4KV, 24Amp.
• Quick and easy to use.
• Reliable and secure connections.
• Up to 50% reduced wiring time.
• Touch-proof connection.
• Vibration proof.
• Reusable.
• Integrated test points.
• Colour coded for easy identification.
• 17th edition IEE wiring regulations (BS7671)
• Wago connectors are IP20 (finger touch) with polyamide 6.6 housing for strength and durability.

Technical data:

• Colour - Orange
• Amperage - 24Amp
• Ingress protection - IP20
• Max. service temp - 105°C
• Rating - 400V, 41Amp
• Brand - Wago

Applications:

• Lighting.
• Power.
• Heating and ventilation.
• Control circuits.
• Wire options are solid and stranded.

Operating Instructions:

• Simply strip the conductors 12mm, then push the conductor into the connector.
• The transparent housing provides a visible indication that the conductor is secure.
• The conductors can be removed by twisting and pulling the conductor at the same time

Standards & Certifications:

• Meets BS7671 17th edition.
• Approvals by IEC, UL, CSA.

Please note - In order to comply with the requirements BS7671 all connectors should be used in a suitable enclosure of material complying with the relevant glow-wire test requirements of BS 458-2.1. This will provide mechanical protection for the connectors as well as protection against dust, damp and accidental damage.