Weathering Slate Flat Roof 100mm Opening Lead 450x450mm

In stock
Product Code
100012211
Features: For use on any flat roofs. Easily dressed to shape. Suitable for flue pipes. Lead slates provide weather-tight joints where flue pipes and s...Read more

DISCLAIMER

This product qualifies for next working day delivery provided it is in stock and your order is placed by 1pm Monday to Thursday. For full T&C's read our Delivery Information.

Your Price
£60.06 £50.05
 
Add to Project List

Select branch to check stock

Select postcode to see availability

Features:

  • For use on any flat roofs.
  • Easily dressed to shape.
  • Suitable for flue pipes.
  • Lead slates provide weather-tight joints where flue pipes and soil stacks penetrate a slate, tile, asphalt, felt or lead covered roof.
  • The flexibility of lead allows the slate base to be dressed to tiles of all profiles, avoiding wind lift or chatter problems.
  • Premium lead slates are cut for BS EN 12588 Code 4 rolled lead sheet and fabricated by lead welding.
  • Slate upstands diameter of 100mm, at an angle of 90Degree for flat roofs.
  • The base dimensions of the slates are 450x450mm and the minimum upstand height at the saddle side of the pipe-base joint is 150mm.

Application:

  • Select a lead slate with an upstand angle suitable to the pitch of the roof of internal diameter such that it allows about 2mm tolerance over the external diameter of the pipe.
  • Always apply cost of Pre-pat or Patination Oil to all exposed surfaces, as well as the underside of the landing edge.
  • Fit over the pipe and on a pitched roof finish the top edge of tile with a welt.
  • When fitting over cast iron pipes, allow extra height to the lead upstand so that it may be dressed into the top of the pipe.
  • When fitting over the plastic pipes you can obtain a solvent welded collar that will provide a weathering over the top of the pipe.

Technical data:

  • Material - Lead alloy sheet manufactured to BS EN 12588 Code 4
  • Base dimensions - 450x450mm
  • Upstand height - 150mm
  • Upstand angle to base - 90Degree
  • Weight - 5.5kg (approx.) per slate
  • Melting point of lead - 327°C
  • Code - 4

  • Material
    Lead Alloy
  • Code
    4
Check for Delivery

Returns

This product can be returned if returned unopened, unused and in a fully resalable condition, including the original packaging.

Click here for the MP Moran return policy

If no Data or Safety Sheets are visible here, please send an email request to customersupport@mpmoran.co.uk