ClassicBond Pressure Sensitive Elastoform Uncured Flashing 1.5x228mm (Sold Per Metre)

Compatible with ClassicBond and ClassicBond Pro membranes, this flashing membrane features an approximately 1.5mm thick, uncured EPDM membrane laminated to a 0.76mm thick, fully cured pressure-sensitive adhesive.

Features:

• Primarily designed for flashing irregular pipes, penetrations, and other details, it proves ideal for versatile applications.
• Its flexibility allows easy moulding to irregular shapes and surfaces. The self-curing property makes it suitable for flashing pipes, scuppers, and various roof system structures and penetrations.
• Adaptable to irregular shapes and surfaces.
• Self-curing membrane.
• Labour and cost savings in field applications.

Technical data:

• Brand - ClassicBond
• Product Type - Pressure Sensitive Elastoform Uncured Flashing
• Material - EPDM / Synthetic Rubber
• Colour - Black
• Thickness - 1.5mm
• Nominal Thickness - 2.29mm
• Width - 228mm
• Nominal Width - 229mm Membrane / 233mm Adhesive
• Length - Sold Per Metre
• Elongation - 480% Min.
• Brittleness Temperature - -45°C

Please Note:

• Avoid prolonged skin contact; wash affected areas with soap and water if necessary.
• High jobsite temperatures exceeding 32ºC may impact product shelf life.
• During warm, sunny weather, store PS Elastoform Flashing rolls in their box or a shaded area until ready for use.
• Storage or use below 4ºC may result in adhesive tack loss; maintain a minimum temperature of 15ºC during overnight storage. Provide hot boxes for jobsite storage to maintain a minimum product temperature of 4ºC.
• Ensure storage in a dry area.
• Be cautious of solvent flash-off; if condensation develops, discontinue application until the surface is dry. Allow for proper conditions before applying Primer and PS Elastoform Flashing.
• Prevent contact with waste products or direct steam venting.
• In colder temperatures, use a heat gun as specified for forming PS Elastoform Flashing.
• Keep the product out of the reach of children.