GF PRIMOFIT Galvanised Male Adaptor NBR ½"

Georg Fischer PRIMOFIT is a compression fitting made out of malleable cast iron, with hot dip galvanised finish. The small and compact fitting has a design of fitting bodie and nut which allows the use of shrink sleeves.

Features:

• For ISO 65 steel pipe to R/EN 10226-1
• Small and compact fitting, specially designed to slide easily over pipes with no extra equipment required.
• Minimum pipe preparation, quick assembly and low cost.
• Pre-assembled, dismantling is not required, meaning no special tools are necessary.
• Offers full end load capability.
• It allows a misalignment of the connected pipes up to 3Degree per compression joint.
• Resistance against fire impact from outside, 650°C according German DVGW and 850°C according to British Gas test procedures.

Technical data:

• Brand - GF
• Range - PRIMOFIT
• Product Type - Male Adaptor NBR
• Material - Malleable Cast Iron
• Finish - Galvanised
• Diameter - ½"
• Weight - 0.236kg

Diagram Dimesions:

• R - ½"
• D - 45mm
• L - 74mm
• X - 30 to 34mm

Standards & Certifications:

• Compression fitting according to prEN 10344 for connection of galvanised steel pipes according to EN 10255 and EN 10220 with measurements according to ISO 65
• Made out of white heart malleable cast iron EN-GJMW-400-5 acc. to EN 1562, sealing materials as above.
• Corrosion protection by hot dip galvanising according to prEN 10356